Figure 58. Removing the M.2 solid-state drive
Figure 59. Installing the M.2 solid-state drive
9. Reinstall the removed parts.
10. Place the computer in an upright position.
11. If a locking device is available, use it to lock the computer.
12. Reconnect the external cables and power cords to the corresponding connectors on the computer.
Memory module
Prerequisite
Before you start, read Appendix A “Important safety information” on page 83 and print the following
instructions.
74
M70a and M90a User Guide
To Next Page
Loading...
Need help?
General