Lenovo V330-15IKB User Manual

8
Chapter 1. Getting to know your computer
 Connecting USB device
You can connect a USB device to your computer by inserting its USB plug (Type A) into the USB
port on your computer.
The first time you plug a USB device into a particular USB port on your computer, Windows
automatically installs a driver for that device. After the driver has been installed, you can
disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs the driver
automatically. However, some devices may require you to install the driver before connecting. Check
the documentation provided by the device’s manufacturer before connecting the device.
Before disconnecting a USB storage device, make sure your computer has finished transferring
data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows
notification area to remove the device before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before connecting it.
Otherwise, the device may not be recognized.

Lenovo V330-15IKB Specifications

General

Operating System	Windows 10 Pro
Camera	720p HD camera
Processor	Up to 8th Gen Intel Core i7
Display	15.6" FHD (1920x1080) anti-glare
RAM	Up to 20GB
Storage	1TB HDD
Graphics	Integrated Intel UHD Graphics 620
Optical Drive	Optional DVD/RW
Audio	Stereo speakers, Dolby Audio
Connectivity	Wi-Fi 802.11ac, Bluetooth 4.1
Ports	HDMI, RJ45, 4-in-1 card reader
Dimensions	375 mm x 253 mm x 22.3 mm
Battery	Up to 6 hours with 30Wh battery (depending on usage)