2
Lenze
2-17
8200 motec/starttec en 12/03
Maximum motor power P
r
[kW] 4.0 5.5 7.5
Three-phase asynchronous motor (4-pole) P
r
[hp] 5.4 7.5 10.2
8200 motec type E82MV302_4B E82MV402_4B E82MV552_4B
Mains voltage U
mains
[V] 3/PE AC 320 V - 0%...440 V + 0%; 45 Hz - 0%...65 Hz + 0%
Data for operation at 3/PE AC 400 V
Rated mains current I
mains
[A] 11.4 14.8 20.2
Output power U, V, W (at 2/4 kHz) S
r
[kVA 6.0 7.9 10.8
Rated output
2 kHz
current at switching
I
r
[A] 8.8 11.4 15.6
frequency
4 kHz
Max. permissible output
2 kHz
current for 60 s
I
max
[A] 11.0 14.2 19.5
at switching frequency
1)
4 kHz
Output voltage U
M
[V] 3~ 0 ... U
mains
/0 ... 650 Hz
Power loss (operation at I
r
at 2/4 kHz) P
v
[W] 140 180 230
Dimensions HxBxT [mm] 325 x 211 x 163 (223)
2)
Weight m [kg] 9.7 (11.4)
2)
Ratings at 400 V mains voltage
1)
Currents for periodic load change cycle: 1 min overcurrent duration at
I
max
2 min base load duration at 75% I
r
2)
For wall mounting/with fan module E82MV
Standard controllers
8200 motec – Operation at increased rated power
Current reduction
Depending on the application conditions and the use of
the 8200 motec, the rated output current may need to be
reduced on types E82MV302_4B to EMV552_4B:
8200 motec mounted on... Current reduction
...Lenze motor/geared motor, forced-ventilated Not necessary
...Lenze motor/geared motor, self-ventilated See Figure 1
...Lenze motor/geared motor, self-ventilated with fan module E82ZMV Not necessary
...not Lenze motor/geared motor Å fan module E82ZMV always required Not necessary
...the wall (wall mounting) Å fan module E82ZMV always required Not necessary
Figure 1:
Reduced rated output current in continuous operation at
40ºC ambient temperature and 4 kHz switching frequency.
I Reduced output current on the 8200 motec
I
r
Rated output current on the 8200 motec
4 kHz switching frequency
f 8200 motec output frequency [Hz]
Note the torque reduction on self-ventilated motors
To Next Page
Loading...
Need help?
General