Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Activating password protection
3
25
EDKVF93−03 EN 2.0
3.1.7 Activating password protection
Note!
ƒ If the password protection is activated (C0094 = 1 ... 9999), you only have
free access to the user menu.
ƒ To access the other menus, you must enter the password. By this, the
password protection is annulled until you enter a new password.
ƒ Please observe that the password−protected parameters can be overwritten
as well when transferring the parameter sets to other standard devices. The
password is not transferred.
ƒ Do not forget your password! If you have forgotten your password, it can
only be reset via a PC or a bus system!
Activate password protection
Step Key
sequence
Action
1. Select the "USER menu" ! " Change to the user menu using the arrow keys
2. Change to the code level ! Display of code C0051 "MCTRL−NACT"
3. Select C0094 Display of code C0094 "Password"
4. Change to the parameter level Display "0" = no password protection
5. Set password
A Select password (1 ... 9999)
B Confirm password
6. Change to the code level
A Display of the operating level
B Display of C0094 and "Password"
7. Change to the "USER menu" " "
The password protection is active now.
You can only quit the user menu if you re−enter the password and confirm it with
.
Remove password protection
Step Key
sequence
Action
1. Change to the code level in the user
menu
!
2. Select C0094 Display of code C0094 "Password"
3. Change to the parameter level Display "9999" = password protection is active
4. Enter password
A Set valid password
B Confirm
The password protection is deactivated by entering the
password once again.
5. Change to the code level
A Display of the operating level
B Display of C0094 and "Password"
The password protection is deactivated now. All menus can be freely accessed again.
efesotomasyon.com - Lenze
To Next Page
Loading...
Need help?
General
