Lenze E84AYCER User Manual

Parameter data transfer
The acyclic channel (PROFIdrive profile)
54
Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9 Parameter data transfer
9.1 The acyclic channel (PROFIdrive profile)
An optional service extension is the acyclic parameter data transfer.
Cyclic and acyclic PROFINET services can be operated simultaneously in the network.
Product features
• There is always only one parameter request in process (no pipelining).
• No spontaneous messages are transferred.
• There are only acyclic parameter requests.
• Profile-specific parameters can be read independently of the I/O device state.
9.1.1 Connection establishment of an I/O controller to an I/O device
An I/O controller can always be used to request parameters from an I/O device if the I/O device is in
the "DATA_EXCHANGE" state.
[9-1] Data communication via the acyclic channel
E94YCER010
$F\FOLFFKDQQHO
5HDG
:ULWH
,2
FRQWUROOHU
,2GHYLFH

Lenze E84AYCER Specifications

General

Brand	Lenze
Model	E84AYCER
Category	Control Unit
Language	English