Lenze E84AYCER User Manual

Installation
Electrical installation
28
Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.3 PROFINET connection
PROFINET is connected via the RJ45 sockets X256 (IN) and X257 (OUT).
[5-8] PROFINET connections X256 (IN) and X257 (OUT)
For connection of the communication module to the PROFINET fieldbus, a standard Ethernet patch
cable is suitable.
Ethernet cable specification
( 30)
The installation and removal of the Ethernet cables is optimised for the use of connectors in accor-
dance with the "Automation Initiative of German Domestic Automobile Manufacturers" (AIDA).
E84YCER001E
 Note!
To prevent the RJ45 socket from being damaged, insert or remove the Ethernet cable
connector straight (at a right angle) into or from the socket.

Lenze E84AYCER Specifications

General

Brand	Lenze
Model	E84AYCER
Category	Control Unit
Language	English