Lenze IE2 g500-H User Manual

Informaon on project planning
Safety instrucons
Basic safety instrucons
Disregarding the following basic safety instrucons and safety informaon may lead to severe
personal injury and damage to property!
•
Only use the product as directed.
•
Never commission the product in the event of visible damage.
•
Never modify the product technically.
•
Never commission the product before assembly has been completed.
•
Never operate the product without the required covers.
•
Connect/disconnect all pluggable connecons only in deenergized condion!
•
Only remove the product from the installaon in the deenergized state.
•
The product can – depending on their degree of protecon – have live, movable or
rotang parts during or aer operaon. Surfaces can be hot.
•
Observe all specicaons of the corresponding documentaon supplied. This is the
condion for safe and trouble-free operaon and the achievement of the specied
product features.
•
The procedural notes and circuit details given in the associated documentaon are
suggesons and their transferability to the respecve applicaon has to be checked. The
manufacturer of the product does not take responsibility for the suitability of the process
and circuit proposals.
•
All work with and on the product may only be carried out by qualied personnel.
IEC 60364 and CENELEC HD 384 dene the qualicaons of these persons:
-
They are familiar with installing, mounng, commissioning, and operang the product.
-
They have the corresponding qualicaons for their work.
-
They know and can apply all regulaons for the prevenon of accidents, direcves, and
laws applicable at the place of use.
Applicaon as directed
•
The product is a professional equipment intended for use by trades, specic professions or
industry and not for sale to the general public. IEC 60050 [IEV 161‑05‑05]
•
To prevent personal injury and damage to property, higher-level safety and protecon
systems must be used!
•
All transport locks must be removed.
•
Mounted eye bolts on the motor are not suitable for transporng geared motors.
•
The product may only be operated under the specied operang condions and in the
specied mounng posions.
•
The product may only be operated on the inverter.
•
Built-in brakes must not be used as safety brakes.
•
The product must not be operated in private areas, in potenally explosive atmospheres
and in areas with harmful gases, oils, acids and radiaon.
Informaon on project planning
Safety instrucons
Basic safety instrucons
16

Lenze IE2 g500-H Specifications

General

Brand	Lenze
Model	IE2 g500-H
Category	Industrial Equipment
Language	English