Lenze SX-1 User Manual

8.4 ______
8.4 Entry of Variable Data
lt is always possible to enter or change data in those Variables which have been selected
and named during Parameter entry. A code key number is not required.
The entry ot Variable data is initiated as tollows:
a) lt a key code number has not yet been entered, press PROGNAR key.
b) lt a key code number has already been entered, either: Press PARIKEY and ENTER
(the key code validity is cancelled), or Press PROGNAR twice (the key code validity
is preserved).
PROG 1.5
Brietly displayed in sequence:
2. Then the tirst three Variables appear,
with their values, it entered: otherwise
values are £~.
3. For the entry ot Variable data, line 2 is
the working line. Use the arrow keys to
place the required Variable there.
55
e. g.
4. Prepare tor entry with the MODE key:
5. Enter the value with the numeric
keypad.
Get
Installation data
Variables Loading
INPUT VAR
Length
Speed
Distance
8/31 -—___ ___
Lanze
= vooo
= V001
= V002
V002
Distance +
V002
Distance +
V002
Distance + 8..12~

Lenze SX-1 Specifications

General

Brand	Lenze
Model	SX-1
Category	Industrial Equipment
Language	English