Lexicon
1-1
Chapter 1 Refe rence Documents, Required Equipment
Reference Documents
MC-1 Owner's Manual - Lexicon P/N 070-13278
MC-1 Quick Reference Guide - Lexicon P/N 070-13279, latest revision
Required Equipment
Tools
The following is a minimum suggested technician's tool kit required for performing disassembly, assembly
and repairs:
• Clean, antistatic, well lit work area.
• (1) #1 Phillips tips screwdriver
• (1) Nut driver starter size #2
• (1) 7/16" Nut drive
• Solder: 63/37 - Tin/Lead Alloy composition, low residue, no-clean solder.
• Magnification glasses and lamps
• SMT Soldering / Desoldering bench-top repair station
Test Equipment
The following is a minimum suggested equipment list required to perform the proof of performance tests.
• A high quality A/V source playback system
• Compact Disc player or other source with 44.1kHz sample rate, digital coax and optical
outputs.
• DVD Player or other source with 48kHz kHz sample rate, digital coax and optical outputs.
• 2 full range speakers
• DVD player with both Composite and S-Video outputs
• Color TV Monitor with both Composite and S-Video inputs
• Cables: (dependent on your signal source)
• 1 single-ended, shielded 75-ohm digital audio cable with RCA plugs on both ends for
connecting the outputs of the Disc player to the digital Coax 1 input of the MC-1.
• 2 single-ended, shielded audio cables with RCA plugs on both ends for connecting the
outputs of the Disc player to the inputs of the MC-1.
• 2 single-ended shielded audio cables with RCA plugs on one end and appropriate
connectors on the other end to the input of the stereo amplifier.
• Audio input Y cable with 2 RCA plugs on the Y end and an appropriate connector to the
Low Distortion Oscillator
• 1 single-ended, shielded audio cable with a RCA connector on one end and an appropriate
connector on the other for connection to the low distortion oscillator.
• 1 single-ended shielded audio cable with RCA connector on one end and appropriate
connector on the other end to connect to the input connector of the THD+N distortion
analyzer.
• 2 single-ended, shielded 75 ohm video RCA style cables
• 2 single-ended, shielded 75 ohm video S-Video style cables
• Low distortion analog oscillator with audio bandpass or 20k - 30khz Low Pass Filter;
Single-ended 600 ohm or less output < .005% THD
• Analog distortion analyzer and level meter
• 100 MHz oscilloscope or better
• Digital distortion analyzer & digital function generator (e.g. Stanford Research Systems
Model DS360 or Audio Precision System 1 with DSP Option /System 2 - optional).
• MC-1 Remote Control, Lexicon P/N - 750-13221
To Next Page
Loading...
Need help?
General
