Configuring the SMTP server
Note: In some printer models, this setting can be
configured
only from the Embedded Web Server.
From the control panel
1 From the control panel, navigate to:
Settings > Device >
Notifications
> E‑mail Alerts Setup > E‑mail Setup
2 Configure the settings.
From the Embedded Web Server
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Device > Notifications > E‑mail Alerts Setup.
3 From the E‑mail Setup section, configure the settings.
4 Click Save.
Printing the Menu Settings Page
From the control panel, navigate to:
Settings > Reports > Menu Settings Page
For non‑touch‑screen printer models, press
to navigate through the settings.
Set up, install, and configure 31
To Next Page
Loading...
Need help?
General
