Clearance requirements for the MFP
Printer model Left side Right side Front Rear Top
MX310, MX410 65 mm (2.56 in.) 110 mm (4.33 in.) 304.8 mm (12 in.) 100 mm (3.94 in.) 243.8 mm (9.6 in.)
MX510, MX511 65 mm (2.56 in.) 110 mm (4.33 in.) 304.8 mm (12 in.) 100 mm (3.94 in.) 228.6 mm (9.0 in.)
MX610, MX611 70 mm (2.76 in.) 110 mm (4.33 in.) 304.8 mm (12 in.) 100 mm (3.94 in.) 228.6 mm (9.0 in.)
Environmental conditions
Note: When shipping or storing printers, always pack the printer supplies (such as cartridges and photoconductors)
separately.
Printer air and wet bulb temperature ranges
Printer model Air temperature Wet bulb temperature
Product operating Product power off Product operating Product power off
MS310, MS312, MS315,
MS410, MS415, MS510,
MS610
15.6–32.20°C (60–90°F) 10–43.30°C (50–110°F) 22.80°C (73°F)
Maximum
26.70°C (80.10°F)
Maximum
MX310, MX410, MX51x,
MX61x
15.6–32.20°C (60–90°F) 10–43.30°C (50–110°F) 22.80°C (73°F)
Maximum
26.70°C (80.10°F)
Maximum
Printer humidity ranges
Printer model Air relative humidity (RH)
MS310, MS312, MS315, MS410, MS415, MS510, MS610 8–80%
MX310, MX410, MX51x, MX61x 8–80%
Ambient operating environment values
Printer model Ambient operating environment
MS310, MS312, MS315, MS410, MS415,
MS510, MS610
16–32°C (60 to 90°F)
8–80% RH
MX310, MX410, MX51x, MX61x 16–32°C (60 to 90°F)
8–80% RH
Shipping and storage ranges for cartridge or imaging unit
Printer model
Shipping and storage value (cartridge or imaging unit)
Short-Term Shipping
Long-Term Storage
*
MS310, MS312, MS315, MS410, MS415,
MS510, MS610
‑40 to 43.3°C (‑40 to 110°F) 2–35°C (34 to 95°F)
8–80% RH
MX310, MX410, MX51x, MX61x ‑40 to 43.3°C (‑40 to 110°F) 2–35°C (34 to 95°F)
8–80% RH
*
Shelf life of supplies is approximately two years. This shelf life estimate is based on storage in standard office environment at
22.2°C (72°F) and 45% humidity.
Printer specifications 19
To Next Page
Loading...
Need help?
General
