78
Operator panel codes
Error communicating with the host computer
Host interface disabled
Light sequence:
• Continue—On
• Paper Jam—Blink
• Error—On
What this light sequence means:
The printer has lost the connection to an external print server (also called an external
network adapter or ENA).
This light sequence is displayed if your printer is connected to the network, but it
cannot detect the print server when you turn on the printer.
What you can do:
• Make sure the cable connecting the ENA and the printer is securely
attached. Turn the printer off and then on to reset the printer.
• Press and hold Cancel to reset the printer.
Light sequence:
• Continue—On
• Load Paper—Blink
• Paper Jam—Blink
• Error—On
What this light sequence means:
The printer USB or parallel port has been disabled.
What you can do:
• Press Continue to clear the message. The printer discards any print
jobs previously sent. Enable the USB or parallel port by selecting a value
other than Disabled for the USB Buffer or Parallel Buffer item in the Local
Printer Setup Utility (see Using the Local Printer Setup Utility).
To Next Page
Loading...
Need help?
General
