Lexmark E 240 User Manual

84
Configuration menus overview
Setup menu
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.
USB menu
Use the USB menu to change printer settings on jobs sent through a Universal Serial Bus (USB) port.
Parallel Mode 2 Determine whether the parallel port
data is sampled on the leading (On) or
trailing (Off) edge of strobe.
•Off
• On*
Mac Binary PS Configure the printer to process
Macintosh binary PostScript print jobs.
• Off—The printer filters PostScript print jobs using
standard protocol.
• On—The printer processes raw binary PostScript print
jobs from computers using the Macintosh operating
system. This setting often causes Windows print jobs
to fail.
• Auto*—The printer processes print jobs from
computers using either Windows or Macintosh
operating systems.
Setting Use this setting to Values
Auto CR after LF Specify whether the printer automatically performs a carriage return after a
line feed control command.
• Off*
•On
Auto LF after CR Specify whether the printer automatically performs a line feed after a
carriage return control command.
• Off*
•On
* Factory default
Setting Use this setting to Values
NPA Mode Send print jobs to the printer and query
printer status information simultaneously.
•Off
•On
• Auto*
Mac Binary PS Configure the printer to process Macintosh
binary PostScript print jobs.
• Off—The printer filters PostScript print jobs using
standard protocol.
• On—The printer processes raw binary PostScript print
jobs from computers using the Macintosh operating
system. This setting often causes Windows print jobs
to fail.
• Auto*—The printer processes print jobs from
computers using either Windows or Macintosh
operating systems.
* Factory default
Setting Use this setting to Values
* Factory default

Lexmark E 240 Specifications

General

Print Technology	Laser
Print Speed (Black)	24 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	10, 000 pages
Standard Paper Capacity	250 sheets
Connectivity	USB 2.0
Duplex Printing	Manual
Supported Operating Systems	Windows, Mac OS, Linux
Output Tray Capacity	100 sheets
Media Sizes Supported	Letter, Legal, A4, A5, B5
Media Types Supported	Plain Paper, Envelopes

Summary

Safety Information

Printer Overview

Installing Software for Local Printing

Windows Software Installation

Instructions for installing printer software on Windows operating systems.

Macintosh Software Installation

Steps for installing printer software on Macintosh operating systems.

UNIX/Linux Software Installation

Guidance for installing printer software on UNIX and Linux platforms.

Installing Software for Network Printing

Windows Network Setup

Procedures for configuring printers for direct or shared network printing in Windows.

Macintosh Network Setup

Steps to set up network printing for Macintosh computers.

UNIX/Linux Network Setup

Instructions for network printing on UNIX and Linux environments.

Installing Options

Using the Operator Panel

Operator Panel Lights

Operator Panel Codes

Software and Network Tasks

Configuring TCP/IP

Steps for assigning an IP address to the printer for network connectivity.

Supplies Information

Ordering Printer Supplies

Information on what supplies are needed and how to order them.

Checking Supply Levels

Changing Toner Cartridge

Toner Cartridge Replacement

Step-by-step instructions for replacing the printer's toner cartridge.

Changing Photoconductor Kit

Photoconductor Kit Replacement

Procedure for replacing the photoconductor kit in the printer.

Troubleshooting

General Problems

Print Quality Problems

Cleaning the Printhead Lens