GA300553102_002_C2 – 04/2017
2. Safety
2.1 General Information
The GRAPHIX is supplied ready for immediate operation. These Operating Instructions shall
assist you during commissioning of the instrument. For further informations please refer to
the detailed Operating Instructions on the supplied USB stick.
2.2 Key to Symbols
Important instructions relating to technical safety and safe operation are emphasised by
symbols.
DANGER or WARNING:
Information designed to prevent any kind of injury to persons.
DANGER:
Information designed to prevent injury to persons and damage to equipment
in connection with electricity.
NOTICE:
General information pointing to further information, respectively reference
sections.
2.3 Basic Safety Information
• During all work like installation, maintenance and repair activities, comply with the
pertinent safety regulations.
DANGER: Mains Voltage
Coming into contact with components at mains voltage level within the
instrument can be dangerous to life when inserting objects or allowing liquids
to enter the instrument
WARNING: Improper Utilisation
Improper utilisation of the instrument can damage it. For this reason operate,
respectively use the instrument only in agreement with the manufacturer’s
specifications.
WARNING: Wrong Connection and Operating Data.
Wrong connection and operating data can damage the instrument. Comply
with all specified connection and operating data.
To Next Page
Loading...
Need help?
General
