170
TIME SETTING
TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to stand-
by mode unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
1
Select TIME.
2
Select Off Time or On Time.
3
Select Repeat.
4
Select Off, Once, Daily, Mon. ~ Fri.,
Mon. ~ Sat., Sat. ~ Sun. or Sun..
5
Set the hour.
6
Set the minutes.
• To cancel On/Off Time function, select Off.
• For On Time function only
1
Select Input.
2
Select the input source.
3
Set the programme.
4
Adjust volume level at switch-on.
OK
Move
● Clock
● Off Time : Off
● On Time : Off
● Sleep Timer : Off
TIME
● On Time : Off
OK
Move
● Clock
● Off Time : Off
● On Time : Off
● Sleep Timer : Off
TIME
● On Time : Off
Repeat
◄
Off
►
Hour
00
Minute
00
Input
Antenna
Programme
TV1
Volume
30
Close
1 Mar 2007 16:09
►
►
To Next Page
Loading...
Need help?
General
