17
ENGENGLISH
ASSEMBLING AND PREPARING
4
Attaching the shelf stand
Image shown may differ from your TV.
- You can use the shelf stand by putting STB (Set
top box).
2
3
1
LN515*
M4 x L8
2EA
Stand Base
Stand Body
CAUTION
y
Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the
Stand may tilt after being installed.)
y
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
5
M4 x L8
1EA
P5 x L69.5
3EA
Wall Plate
NOTE
y
To install wall mount anchor, you can
refer to p.18.