27
ENGENGLISH
WATCHING TV
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by
pressing Q.MENU or accessing Aspect Ratio in
the PICTURE menu.
NOTE
y
The available ratio varies depending on the
input source.
- 16:9: Resizes images to fit the screen width.
-
Just Scan: Displays video images in the
original size without removing parts of the
edge of the image. (This function works
in Component/HDMI (720P/1080i/1080p)
Mode.)
NOTE
y
If you select Just Scan, you may see
image noises at the edge of the original
signal.
-
Original: When your TV receives a wide
screen signal it will automatically change to
the picture format broadcasted.
(4:3 → 4:3) (16:9 → 16:9)
Editing your programme list
When a programme number is skipped, it means
that you will be unable to select it using P
button during TV viewing.
If you wish to select the skipped programme,
directly enter the programme number with the
NUMBER buttons or select it in the Programme
edit menu.
This function enables you to skip the stored
programmes.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Programme Edit.
3 Edit programmes using the following
buttons.
Button Description
Red button
Deletes a programme.
Press the Red button twice.
The selected programme
is deleted, all the following
programmes are shifted up
one position.
Yellow button
Moves a programme.
Press the Yellow button again
to release this function.
Blue button
Selects a programme number
to be skipped. Press the Blue
button again to release the
skipped programme.
4 When you return to the previous menu,
press BACK
ꕣ
.
Selecting a programme on the
programme list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to
desired programme and press OK .
3 When you return to the previous menu,
press LIST.
NOTE
y
You may find some blue programmes.
They have been set up to be skipped by
auto programming or in the programme
edit mode.
y
Some programmes with the programme
number shown in the programme
list indicate there is no station name
assigned.
To Next Page
Loading...
Need help?
General
