Fail Over
The input source with the highest priority will be selected.
Off
• The Auto-Fail Over feature is disabled.
Auto
• The input source changes according to the specified order. When several input sources are found, the input source
with the highest priority will be selected.
• Priority
Case 1) 1. HDMI, 2. DVI-D, 3. DISPLAYPORT, 4. OPS, 5. RGB, 6. Internal Memory
Case 2) 1. HDMI1, 2. HDMI2, 3. OPS/HDMI3/DVI-D or OPS/DVI-D, 4. DP, 5. Internal Memory
Manual
• The input source changes according to the specified order. When several input sources are found, the input source
with the highest priority will be selected.
• You can set Priority 1 - Priority 6.
NOTE
• If the input switches to internal memory, USB or SD card due to Fail Over, the videos or images saved in the top-level
directory of the internal memory, USB or SD card will be played.
• If there are both video files and image files in the same folder, then only the video files will be played.
• SuperSign content saved in the Normal or fail_over (FAIL_OVER) folder is played automatically due to Fail Over.
• The number of priorities may vary depending on the model.
ENGLISH
22
To Next Page
Loading...
Need help?
General
