ENGLISH_index
58
64. [Intelligent Auto] (Command: t i)
Selects the desired Intelligent Auto option.
Transmission
(t)(i)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(i)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
65. [OSD Portrait Mode] (Command: t h)
Selects the desired Portrait mode option.
Transmission
(t)(h)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgement
(h)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
66. [Reset to Initial Settings] (Command: t n)
Enables/disables the Reset to Initial settings.
Transmission
(t)(n)( )(Set ID)( )(Data)(Cr)
Data 00: Disables the settings
01: Enables the settings
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
67. [Time Sync] (Command: s n, 16)
Configures the Time Sync.
Transmission
(s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr)
Data 00: Off
01: On
* This feature works in the Master mode.
* This feature does not work if the current time is not set.
Acknowledgement
(n)( )(Set ID)( )(OK/NG)( )(1)(6)( )(Data)(x)
* It may not be supported depending on the model.
68. [Contents Sync] (Command: t g)
Configures the Contents Sync.
Transmission
(t)(g)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(g)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
69. [Pivot Mode] (Command: t a)
Sets Pivot Mode to on/off.
Transmission
(t)(a)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(a)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be supported in certain models.
To Next Page
Loading...
Need help?
General
