ASSEMBLING
AND
PREPARING 17
Lifting and moving
the
TV
Setting
up
the
TV
When moving or lifting the
TV,
read
the following
to prevent the
TV
from being scratched or
damaged and for safe transportation regardless
of
its type and size.
Put your
TV
on
a pedestal stand and mount the
TV
on
a table or wall.
Attaching
the
stand
&
CAUTION
--.----------------
• Avoid touching the screen at
all
times,
as
this may result
in
damage to the screen.
If you
are
not mounting the
TV
to a wall, use the
following instructions to attach the stand.
PZ150,. PZ950, PZ950Useries
i:t'
..
)t-~-·.
:.:.
-
>.",
.
.:.
~,'.
__
.
,,-'.
Stand Body
Stand Base
I
Lay
the
TV
with the screen side down
on
a flat
surface.
r&
CAUTION
----------.,
• Lay a foam mat or soft protective cloth
on
the surface to protect the screen from
damage. Make sure no objects press
against the screen.
~~
" " Stand Body
/~"
,
;'5J
~,
.'
Model
Screwfor
Number
of
assembly
screws
5OPZ750,
M5
x 14.5 3
50PZ950,
50PZ950U
6OPZ750,
M5
x 14,5
4
6OPZ950,
6OPZ950U
2 Assemble the parts
of
the stand body with the
stand base
of
the
TV.
• It
is
recommended to move the
TV
in
the
box or packing material that the
TV
originally
came
in.
• Before moving or lifting the
TV,
disconnect
the power cord
and
all
cables.
• When holding the
TV,
the screen should face
away from you to avoid damage.
~
~
• Hold the top
and
bottom of the
TV
frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill
area.
• When transporting a large
TV,
there should
be
at least 2 people.
• When transporting the
TV
by hand, hold the
TV
as
shown
in
the following illustration.
~
• When transporting the
TV,
do not expose the
TV
to jolts or excessive vibration.
• When transporting the
TV,
keep the
TV
upright, never turn the
TV
on
its side or tilt
towards the left or right.
Stand Base