EasyManuals Logo

LG 42PJ350 Owner's Manual

LG 42PJ350
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
149
APPENDIX
TROUBLESHOOTING
Abnormal Operation
The remote control
doesn’t w
ork
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
TV turns off suddenly
Is the sleep timer set?
Check the power control settings. Power interrupted.
If there is no signal, the TV turns off automatically in 15 minutes.
Video Problems
No picture &No sound
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
Picture appears slowly
after switching on
This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
five minutes.
No or poor color or
poor picture
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Check for local interference such as an electrical appliance or power
tool.
Poor reception on
some channels
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Lines or streaks in pic-
tures
Check antenna (Change the direction of the antenna).
No picture when con-
necting HDMI
If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers
or no screen display. In this case use the latest cables that support High
Speed HDMI.
*This feature is not available for all models.
APPENDIX

Table of Contents

Other manuals for LG 42PJ350

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 42PJ350 and is the answer not in the manual?

LG 42PJ350 Specifications

General IconGeneral
Audio systemMono/Stereo/Dual (MTS/SAP)
RMS rated power20 W
Number of speakers2
Product colorBlack
LED indicatorsStand-by
Panel mounting interface400 x 400 mm
Integrated clockYes
Power requirements100V - 240V, 50/60 Hz
Mean time between failures (MTBF)100000 h
HDMI ports quantity3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out1
HD typeXGA
Display diagonal42 \
Display brightness1500 cd/m²
Display resolution1024 x 768 pixels
Display technologyLCD
Native aspect ratio16:9
Contrast ratio (dynamic)3000000:1
Power consumption (standby)0.1 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)260 mm
Width (with stand)988 mm
Height (with stand)688.5 mm
Weight (with stand)21000 g
Depth (without stand)55.3 mm
Height (without stand)621.8 mm
Weight (without stand)20000 g

Related product manuals