- 4 -
LGE Internal Use OnlyCopyright ©2010 LG Electronics Inc. All rights reserved.
Only for training and service purposes
SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement
.
V Application Range
This spec is applied to PDP TV used PP01A Chassis.
V Specification
Each part is tested as below without special appointment.
(1) Temperature : 25 °C ± 5 °C (77 °F ± 9 °F), CST : 40 ± 5
(2) Relative Humidity: 65 % ± 10%
(3) Power Voltage: Standard Input voltage (100 V - 240 V ~, 50 / 60 Hz)
* Standard Voltage of each product is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
SBOM.
(5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
(1) Performance : LGE TV test method followed.
(2) Demanded other specification
Safety : CE, IEC specification
EMC : CE, IEC
V Module Specification
(1) 42” XGA
42PJ350R-MA Central and South America LG
Model Name Market Place Brand
Model Name
42PJ350R-MA
Remark
Safety : IEC/ EN60065, EMI : CISPR13
Market
Central and South America
Appliance
TEST
Display Screen Device
Aspect Ratio
PDP Module
Operating Environment
Storage Environment
Input Voltage
1
2
3
4
5
6
No Item Specification Remark
106 cm (42 inch) 16: 9 Color Plasma Display Module
16:9
PDP42T1###,
RGB Closed Type
1) Temp. : 0 deg ~ 60 deg
2) Humidity : 20 % ~ 80 %
3) Temp. : -20 deg ~ 60 deg
4) Humidity : 10 % ~ 90 %
AC 100 V - 240 V, 50 / 60 Hz
PDP
Glass Filter
LGE SPEC.
Maker : LGIT
To Next Page
Loading...
Need help?
General
