Operating 31
Operating
4
Basic Operations on
USB
1. Connect the USB device to the USB port.
2.
Select USB function by pressing F.
To Do this
Stop Press
Z
.
Playback
Press
X
on the remote control or
N
on the unit
Pause
Press
M
on the remote control or
N
on the unit.
Scanning for a
section within
a le
Press and hold
C
/
V
or
c
/
v
on the remote control
during playback and release it at
the point you want to listen to.
Selecting a le
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired le directly.
Skipping to
the next/
previous le
- In stop status,
Press
C
/
V
to go to the next/
previous le.
- During playback,
(1) By using
C
/
V
buttons:
Press
V
to go to the next le.
Playing in less than 3 seconds,
press
C
to go to the previous le.
Playing after 3 seconds, press
C
to go to the beginning of the le.
(2) By using SEARCH buttons:
Rotate EQUALIZER / SEARCH &
MULTI on the unit or
C
/
V
and
press
N
on the unit to play the
le.
Playing
repeatedly or
randomly
Press
h
REPEAT on the
remote control repeatedly. Refer
to the note for details about the
display change.
y
Repeat/Shufe playback operates as follows.
On Diplay Description
OFF
Plays songs in order and stops
the playback.
ONE Plays a same song repeatedly.
FOLDER Plays songs in a folder repeatedly.
ALL Plays all the songs on repeatedly.
SHUFFLE
Plays all the songs once randomly,
and stops the playback.
y
When you play JUKE BOX list, only ONE and
ALL are available.
y
Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
y
USB function is only available on music
playback.
,
Note