28
PROGRAMMING MODE - SETUP MODE
Entering set up mode.
You will see LqC1
Button Display
Press the
90°C MEDICAL
button.
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Press the
75°C HOT
or the
60°C NORMAL
button until appears in the
display.
Press the
START
button.
Display previous top spin speed.
Press
75°C HOT(+)
or
60°C NORMAL(-)
button to select top spin speed. (0~3)
Press the
START
button.
The machine sets up the top spin speed, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
5. Top spin speed – final spin time depends on RPM
NOTE
• Top spin speed
• If you select 800, the final spin time will be reduced by 9minutes
• If you select 1150 rpm, the final spin time is fixed by 11 minutes
• If you select 600, the final spin time will be reduced by 7 minutes
0: 1150 rpm
1: 1000 rpm
2: 800 rpm
3: 600 rpm
To Next Page
Loading...
Need help?
General
