40
MAINTENANCE
Cleaning the drain pump filter
The washing machine fails to drain if the drain pump filter is
clogged. Periodically clean the drain filter to prevent clogging
with foreign objects.
1
Pull out the plug to turn off the washing machine.
2
Open the drain pump filter cover.
3
Unclip the drain hose and remove the plug from the drain
hose to drain the remaining water.
4
Twist the pump filter counterclockwise to remove.
5
Clean the pump filter and opening.
6
Recap the plug onto the drain hose and reattach the drain
hose.
7
Insert the drain pump filter.
8
Close the drain pump filter cover.
WARNING
• Make sure to pull out the plug before cleaning. Failure
to do so may cause electric shock.
• Opening the drain filter will result in water overflowing
if there is water in the washer tub. Make sure to check
if the water is completely drained before opening the
drain filter.
• If you use the washing machine with the drain filter
reassembled incorrectly after cleaning it, or if you use
the machine without the filter, it may cause leaks or
malfunction of the washing machine.
NOTE
• message will blink when the drain pump filter is
clogged with dirt. Clean the drain pump filter.
To Next Page
Loading...
Need help?
General
