PROGRAMMING MODE - COLLECT MODE
Collect information data : (display)
The washer collects the usage data so that the owner can check various information like number of
various cycles used, how many times card or coins used, etc.
Entering the collect mode
Data Name
Button Display Description
Entering
the collect
mode
1.
Entering the
programming
mode.
Insert service card (card type)
Turn on/off toggle switch (card type)
2.
Hot
Press the
Hot
button until appears in
the display.
3. Warm(+), Cold(-)
Press the
Warm (+), Cold (-)
button until
appears in the display.
4. Start
Enter the Collect information data.
5. Warm(+), Cold(-)
xxxx
Move to each data list that you want to check
by pressing with
Warm (+)
or
Cold (-)
button.
6. Start
xxxx
Display the value of selected data list
7. Hot
Move to upper level or Comes back to Idle
State
❖
Check the collect information reference to the follow lists. The lists are displayed by abbreviations.
To Next Page
Loading...
Need help?
General
