19
206-4290
The FMA-LG102 software web page provides a utility to download FTG device (EBL, LMT7Z9, or LMT7Z7)
rmware via the RF distribution system. Use this procedure to update the rmware on the FTG device(s).
Note: TVs with FTG device(s) will not be operable during rmware download and update (approximately ve
minutes).
1. Launch a web browser, and type http://ipaddress in the browser’s address bar, where ipaddress is
either the network IP address assigned by a DHCP server to the FMA-LG102 or the FMA-LG102’s default
IP address (see “FMA-LG102 Configuration Prerequisites” information on page 13). Then, press Enter.
2. Click the FTG Device Firmware RF Downloader link at the bottom of the FMA-LG102 software web
main page.
3. The system will display a login pop-up window. In the User Name field, type lg; in the Password field,
type service. Then, click OK to continue to the FTG Device Firmware RF Downloader web page.
4. Click the Browse button at the right of the Firmware File To Upload field in the Firmware File Upload
section of the screen.
5. Browse to the desired Firmware (.mot) le, select the le, and click the Open button.
6. Conrm that the path shown in the Firmware File To Upload eld is correct for the Firmware le
selected, and then click the Upload File button to upload the le to the FMA-LG102.
Note: After you click the Upload File button, the screen will begin to refresh/reload. The upload process
may take a few seconds. Wait for the screen to completely reload before proceeding.
7. In the RF Downloader section of the screen:
• The Version indicator should now show the rmware version number that corresponds to the Firmware
le you just uploaded. Click the check box at the right of the Version number to conrm its accuracy.
• Make sure the proper FTG device option—either LG FTG Device(s) Only or FTG Device(s) (all
vendors)—is selected.
8. Click the Download button at the bottom of the screen to initiate the rmware update.
The broadcast of rmware completes in approximately two minutes, and the FTG device will require an
additional two minutes to update rmware, after which the TV will become operable again.
Reference: FTG Device Firmware RF Downloader
To Next Page
Loading...
Need help?
General
