11
Operation
Tape Playback
Basic Playback
1.
Press FUNCTION repeatedly until the
TAPE indicator appears.
2. Open cassette deck by pushing
STOP/EJECT(
x
/
Z) button.
3. Insert a cassette with the tape side to the
bottom and then close the deck.
4.
Press PLAY (
B
).
To Stop Play
Press STOP/EJECT (
x
/
Z
) during playback.
To Pause Play
Press PAUSE (X) during playback.
Press this button again it to resume play.
To play Fast Rewind or Fast Forward
Press REWIND/FAST FORWARD
(
bbbb
/
BBBB
) on the front panel during
playback or stopping.
AUTO STOP DECK
When the tape deck has finished playing the front
side of the tape ,the tape will automatically stop.
Recording
Basic Setting
1.
Select the function (USB,CD,TUNER/BAND
or AUX) you want to record.
2. Open the cassette deck and insert a blank
cassette into the cassette compartment.
3. Wind the tape to the point where you would
like recording to starts.
(Use only normal tapes.)
Recording from Radio, CD or Auxiliary
source
1.
Press FUNCTION button to select desired
recording source, and then press RECORD
(z) button.
The recording begins.
For your reference
When you press RECORD (z) button,
PLAY(
B
) button is pressed automatically.
2. To pause recording
Press PAUSE (X) button during recording.
Press PAUSE (X) button again to resume
recording.
3. To stop recording
Press STOP/EJECT (
x
/Z).
CD to Tape Synchronized Recording
The CD synchro recording function dubs a com-
plete CD and programmed titles automatically into
a cassette.
1. When you select CD function, press
RECORD(z) button.
“REC” appears and “ ” displays
in the display window.
2. The synchronized recording is started
automatically after about 7 seconds.
otes
• If you wish to record from a desired track, select
the desired track with CD SKIP/SEARCH
(.m/M>) before commencing CD
synchro recording.
• The function change is not possible during
recording.
Operation
To Next Page
Loading...
Need help?
General
