14
USB Function
Basic Playback
1. Plug the USB device into the USB connector of
your unit.
2. Press the USB button to enter the USB mode.
“CHECKING” appears in the display
window, and then the total number of files is dis-
played.
3. Press PLAY (
BB
/
[]
) on the front panel or PLAY/
PAUSE (
BB
/
[]
)
on the remote control
.
In addition, you can also play using the NUM-
BER buttons.
To Remove the USB from the unit
1. Choose the other functions except USB
function in order to remove the USB.
2. Remove the USB from the unit.
otes
• Do not remove the USB during the playback.
• A Back up demands to prevent a data damage.
• Besides Basic Playback,If you want to operate
other functions, see the CD Playback section.
Moving to other cards
When you use a MP3 player or memory card,
Press D.SKIP on the remote control during
playing or stopping.
otes
• Don’t remove a MP3 player or memory card while
playing the USB.
• Don’t add or remove the memory card when play-
ing the USB by using a multi card reader.
• Numbers of file available are maximum 999 EA.
• Be sure to save file in the memory card after
formatting.
• No cladding hard disc is supported.
• The MP3 player requiring installation of a drive is
not supported.
• This unit can play USB device that contains MP3
files.
• The MP3 file name and ID3 TAG should be
named using English.
• This player can not format memory card.
• This player can not use USB HUB.
• Recommended Memory Card
• This unit may not be available for some USB
device.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure
Digital Card (SD), Multi Media Card (MMC), Memory
Stick Pro (MS-Pro)
- Compatible with : FAT12,16,32
- Only use the memory cards recommended.
Operation
To Next Page
Loading...
Need help?
General
