13
Operation
To Program Play
You can arrange the order of the tracks on the
discs and create your own program. The program
can contain up to 20 tracks.
1. Press PROGRAM/MEMO.
(or PROGRAM/MEMO.on the remote control)
on the stop mode.
2. Press CD SKIP/SEARCH (.m/M>)
buttons to select the track you want.
3. Press PROGRAM/MEMO.
(or PROGRAM/MEMO. on the remote control).
4. Repeat 1-3.
5. Press CD PLAY/ PAUSE (
BB
/
[]
).
To check program contents
Press PROGRAM/MEMO.(or PROGRAM/MEMO.
on the remote control) on the stop mode.
-Atrack and program number will be displayed.
To clear program contents
Press PROGRAM/MEMO. (or PROGRAM/MEMO.
on the remote control) on the stop mode. And then
press STOP/CLEAR on the front panel or
STOP(
x
) on the remote control.
To add program contents
1. Press PROGRAM/MEMO.
(or PROGRAM/MEMO. on the remote control)
repeatedly on the program stop mode until
track Number blinks.
2. Repeat 2-5
To modify program contents
1. Press the PROGRAM/MEMO.
(or PROGRAM/MEMO. on the remote control)
to display program number you want to modify.
2. Repeat 2-5.
About MP3/WMA
MP3
• An MP3 file is audio data compressed by using
the MPEG1 audio layer-3 file-coding scheme.
We call files that have the “.mp3” file extension
“MP3 files”.
• The unit can not read an MP3 file that has not
“.mp3” file extension.
WMA
• WMA files are a Microsoft audio compression
technology.
• WMA(Windows Media Audio) offers double the
audio compression of the MP3 files.
MP3/WMA CDs compatibility with this unit :
1. Sampling Frequency / 8 - 48kHz(MP3),
32 - 48kHz(WMA)
2. Bit rate / 8 - 320kbps(MP3),48-320kbps(WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the soft-
ware which cannot create a FILE SYSTEM, for
example “Direct-CD” etc., it is impossible to
playback MP3 files. We recommend that you
use “Easy-CD Creator”, which creates an
ISO9660 file system.
5. File names should be named using 30 letters
or less and must incorporate “.mp3” “.wma”
extension e.g. “********.MP3”or “********.WMA”.
6.
Do not use special letters such as “/ : * ? “ < > ”
etc.
7. If there are more than 1000 tracks on a CD ,
the display will only show up to 999 tracks .
About MULTI SESSION
- This function recognizes the multi session disc
according to the CD type.
Example: If there are MP3/WMA files in the first
session, the MP3/WMA file in the first
session are only played.
If there are only MP3/WMA files in the
whole session, all of the MP3/WMA
files in the session are played.
If there’s an Audio CD in the first ses-
sion, only the Audio CD in the first ses-
sion is played.
Operation
To Next Page
Loading...
Need help?
General
