To Next Page

To Previous Page

USINGTHEPROJECTOR

ConnectingtoanAntennaorCable

To watch TV using an indoor/

outdoor antenna, connect a wall

terminal and the

port of the Projector using an RF

cable (75 Ω).

You can watch terrestrial or cable

(analog or digital) TV.

(The RF cable is sold separately.)

• Make sure not to bend the copper wire of the RF cable (75 Ω). Turn

the input jack to the right to fasten it.

Copper wire

• Ensure you use a standard coaxial cable (75 Ω, sold separately)

when connecting to the projector input.

• For better image quality in locations where signal strength is low,

purchase and install a signal amplifier (booster).

• A signal splitter is required if you want to use two or more projectors

through one antenna.

• If you have any problems when installing the antenna, please consult

a suitable retailer or the store where you purchased the antenna.

NOTE

Questions and Answers:

Need help?

Do you have a question about the LG Minibeam PH550 and is the answer not in the manual?

LG Minibeam PH550 Specifications

General