39
USINGTHEPROJECTOR
ToSetChannel
Image shown may differ from your projector.
MemorizingtheAvailableChannels
UsingtheAutoTuningfunction
Saves a channel which is currently broadcasting. Be sure to activate Auto
Tuning when you move to a new home or change the position of your
projector. When you activate this function, make sure that the antenna is
connected and there are channels broadcasting signals.
1 Press the SETTINGS button.
2 Press the , , , or button to select CHANNEL and press the
OK button.
3 Press the , button to select AutoTuning and press the OK
button.
4 Select Start to start automatic tuning. The projector scans and saves
available channels automatically.
5 When you are nished, press the EXIT button.