LG OM7560 Owner's Manual

Connecting16
Connecting
2
X-BOOM PLUS
You can connect two units to play music together.
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using Audio
cable.
2. Press and hold LIGHTING / X-BOOM PLUS on
the unit for 3 seconds connected through AUX
OUT and then select PLUS ON.
“PLUS ON” appears in the display window and
change to “DELAY time” soon.
3. Rotate SCRATCH / LEVEL / SYNC SET to adjust
Delay setting.
When “PLUS ON” and “DELAY time” are displayed
in the display window, you can adjust the delay
time.
4. Press LIGHTING / X-BOOM PLUS to save the
Delay setting.
y This function is not available on LG TV
function.
y The initial Delay is 30 ms. If you want to
change the Delay time, Rotate SCRATCH /
LEVEL / SYNC SET. The connected device’s
Delay may differ. If Audio Sync is not matched,
adjust Delay of X-BOOM PLUS to synchronize
sound.
y It is available to adjust the Delay from 0
ms to 200 ms. Synchronizing tempo is not
available depending on devices.
y Delay value is saved and X-BOOM PLUS is
turned off when the unit turns off.
y You can select PLUS ON/PLUS OFF mode by
pressing and holding LIGHTING / X-BOOM
PLUS for 3 seconds on the unit.
,
Note
PORT. IN Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN connector.
Portable cable
MP3 player etc.
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1 on the remote
control or 1/! on the unit.
3. Press F on the remote control or F / WIRELESS
BOOM on the unit to select AUX or PORTABLE
Function.
4. Turn on the portable player or external device and
start it playing.
Automatically switches to the PORTABEL
function when you connect the portable device
to the PORT. IN connector.
,
Note

LG OM7560 Specifications

Power

power consumption networked standby	0.5 W
bus power supply (USB)	5 V 0 500 mA
amplifier output power	1, 000 W

Wireless Specifications

frequency range	2402 to 2480 MHz
output power	10 dBm
minimum distance from body	20 cm

Weight and Dimensions

dimensions	330 mm x 815 mm x 302 mm
net weight	16.8 kg