Operating32
Operating
4
Radio Operations
Be sure that the FM antenna is fully extended.
Listening to the radio
1. Press F until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning:
Press and hold TUNING-/+ on the remote
control or
C
/
V
on the unit until the frequency
indication starts to change, then release. Scanning
stops when the unit tunes in a station.
Or
Manual tuning:
Press TUNING-/+ on the remote control or
C
/
V
on the unit repeatedly.
3. Adjust the volume by pressing VOL +/-.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press F until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING-/+ on the remote control or
C
/
V
on
the unit.
3. Press
m
on the remote control. A preset number
will blink in the display window.
4. Press PRESET +/- on the remote control to
select the preset number you want.
5. Press
m
on the remote control. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET +/- or 0
to 9 numerical buttons on the remote control.
Deleting all the saved stations
1. Press CLEAR on the remote control.
“DEL” and “ALL” will flash up alternately on the
unit display.
If there is no saved radio stations, it displays
“NONE”.
2. Press CLEAR on the remote control to erase all
the saved radio stations.
“DELETED ALL” will scroll and on the display
window.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
