68
CUSTOMIZINGSETTINGS
TIMESettings
1 Press the SETTINGS button.
2 Use the , , , or
button to select TIME and press
the OK button.
3 Use the , , , or
button to set up the desired item
and press the OK button.
- To return to the previous
menu, press the button.
TIME
• Clock
• Off Time : Off
• On Time : Off
• Sleep Timer : Off
• Auto Off : 60 min.
• Automatic Standby : Off
ꔂ Move ꔉ OK
The available time settings are described as follows.
Menu Description
Clock Sets the time, date, or timer feature.
OffTime/
OnTime
Sets the time to turn on or off the projector automatically.
To use this feature, you should set the current time and
date in advance.
To use this feature, set the time correctly.
If you do not want to set OffTime/OnTime, select Off
in Repeat.
• If you set bothOfftime and Ontime features to
the same time, the Off time feature overrides the
On time feature.
• If you do not press any button within two hours after
the projector is turned on by the OnTime feature,
the projector enters standby mode automatically.
Sleep
Timer
Turns off the Projector after a preset number of minutes.
To cancel the SleepTimer, select Off.
AutoOff
If there is no signal, the projector automatically turns off
after the preset time has elapsed.
Automatic
Standby
Turns off the projector automatically after a set period of
time if there is no button input on the projector.