LG SJ7 User Manual

2 Connecting
Connecting
12
Connecting
2
Organizing cables
You can organize the cable with cable ties.
1. Hold the cables together with cable ties as shown
below.
2. Tighten cable ties.
Connecting the AC
Adapter
Connect the speaker to the power supply with the
supplied AC adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
>
Caution
Charging the Unit
(Secondary unit only)
Connecting the AC adapter
Secondary unit uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
If the battery is fully charged in charging mode,
LED is changed from red to green. Then LED is
turned off after 15 seconds.

LG SJ7 Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	320 W
Audio output channels	4.1 channels
Audio Return Channel (ARC)	Yes
Product color	Black
TV stand usage	No
Recommended usage	Universal
Audio formats supported	LPCM
HDMI in	1
HDMI version	1.4
Bluetooth version	4.0
Connectivity technology	Wired & Wireless
Digital audio coaxial in	0
Apple docking compatibility	Not supported
Cables included	Optical
Receiver included	-
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Subwoofer type	Active subwoofer
Subwoofer connectivity	Wireless

Weight and Dimensions

Depth	109 mm
Width	340 mm
Height	74 mm
Subwoofer depth	252 mm
Subwoofer width	171 mm
Subwoofer height	320 mm
Subwoofer weight	4200 g