Checking the charging status
When AC Adapter is connected, battery charging is
started. You can check the charging status by
Battery LED on the rear of Secondary unit .
LED Description
Battery is fully charged. Battery LED
turns on green for 15 seconds and
turned off.
Battery is charging.
y
Operating time is approx. 4 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
y
If you listen to the music while charging, it will
take longer to charge.
,
Note
Checking Battery status
If the power turned on, you can check the battery
status by pressing buttons on side panel of
Secondary unit. The
Battery LED is displayed for
15 seconds and turned off.
Then
Battery LED light will change depending on
battery status.
LED Condition Status
Green
Amber
Red
Blinking
Turned
Off
Battery LED turns
on green.
Battery LED turns
on amber.
Battery LED blinks
with red.
Battery LED is
turned off
Secondary unit
connection
LED indicator of Secondary unit
You can check the connected status of Primary unit
and Secondary unit by LED indicator of Secondary
unit.
LED Color Status
White
(Blink)
Attempting to make connection.
The connection is completed.
The Secondary unit is in standby
mode or the connection is failed.
Connecting the Primary unit and
Secondary unit
1. Connect the power cord to the Primary unit and
plug the power cord into a power outlet.
2. Turn on the Primary unit by pressing
1
.
3. Turn on the Secondary unit by switching the
Usage Mode Switch to REAR or SOUND BAR.:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
