LG SJ8S User Manual

Connecting22
Connecting
2
Connecting the speaker
to your Home Network
Using a wired network provides the best
performance, because the attached devices connect
directly to the network without radio frequency
interference.
Please refer to the documentation for your network
device for further instructions.
Preparation
y
Make sure that wireless network environment
using a router is installed at your home.
y
Make sure that the speaker and the smart device
are connected to the same router.
Requirements
y
Wireless router
y
Smart device (Android or iOS)
y
Make sure that DHCP’s server is activated on
wireless router.
y
If you cannot connect the speaker with your
router, go to setting of the router and then
make sure that “Allow wireless client to see
each other and access my local network” box
is unchecked.
,
Note
Simple Connection (EZ Setup)
Preparation
y
For Simple Connection, Wi-Fi network condition is
needed.
y
Make sure that the Bluetooth setting on your
smart device in on.
y
Select WI-FI function by using F on the remote
control or F on the sound bar.
y
Simple Connection is supported by Bluetooth
Ver 4.0 (or higher).
y
If Simple Connection screen is not displayed
on the screen, connect the unit by the other
way. Please refer to “Connecting the speaker
to your network with a LAN cable” (page
23) or “Connecting the speaker to your
Network via the Wi-Fi Setup Method” (page
25 or page 28)
,
Note
1. Plug in the desired device, and tap [Next].
2. App searches for the speaker and connects it
automatically, Tap [Next].
or

LG SJ8S Specifications

General

Brand	LG
Model	SJ8S
Category	Speaker System
Language	English