Display
Operation (continued)
Button Description
(Press before wash cycle) Pre-wash heavily soiled laundry (See
y
page. 26).
(Press and hold during wash cycle) Lock/Unlock the button (See
y
page. 27).
RINSE + SPIN
y
- For items that only require rinsing and spinning (See page 26).
(Press before wash cycle) Add extra rinse cycle to the selected one (See
y
page. 26).
(Press before wash cycle) Add water during wash and rinse cycle (See
y
page. 26).
(Press and hold) Tuning on/off melody and button tones (See
y
page. 27).
Set delay time of starting cycle (See
y
page. 26).
Use this option for heavily soiled loads that need improved stain treatment (
y
See page. 26).
Use this option to save your energy consumption (
y
See page. 27).
Button Description
At the beginning of the cycle, the washer tumbles the load and detects the weight of the clothes.
y
The display will indicate the approximate load size in the LOAD SIZE display. This allows you to
adjust the amount of detergent and other additives for best results and improved efficiency.
This portion of the display shows which stage of the wash cycle is currently underway (LOAD
y
SENSING, WASH, RINSE or SPIN).
Indicates that the door is locked. The washer door will lock while the washer is operating. The door
y
can be unlocked by pressing the START/ PAUSE button to stop the washer.
This indicator shows that the washer has been set for DELAY WASH. The washer will start
y
automatically after the set delay time has passed.
When the START/PAUSE button is pressed, the washer automatically detects the wash load (weight)
y
and optimizes the washing time, based on the selected cycle and options. The display will then
indicate the estimated time remaining for the selected wash cycle.
Door lock
indicator
Load size sensing indicator
(See page. 27)
Estimated time remaining/
error message display
(See page 34)
Cycle
process
indicator
Delay
wash
indicator
To Next Page
Loading...
Need help?
General
Weight and Dimensions
