Logik L24HEDW19 User Manual

37
Do not repeatedly insert or remove the
Common Access Module as this may
damage the interface and cause
a malfunction.
This feature is not available in all countries.
To insert the Common Access Module
1. Before you insert the Common Access Module, ensure that the TV is
switched off and the viewing card is inserted in accordance with the
Service Provider’s instructions.
2. Insert the Common Access Module into the slot. Flip it to the other side
and try again if you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module, ensure that the TV is
switched off at the mains.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
CI (Common Interface) (DTV Mode)
The common interface allows the use of a Common Access Module to enable you to view scrambled (pay-per-view) services. This
is for services that may become available in the future. The Common Access Module and viewing card can be obtained from the
service provider when available.
CI CARD IN
Common Access
Module
Rear Left Side View of TV
CI (Common Interface)
Allows the Common Access Module to be
inserted and access the content that has
been encrypted.
SCART
SPDIF
COMMON INTERFACE
USB
5Vdc
Max. 500mA
VGA
ANT.
HDMI 1
HDMI 2
LR
MODE - / I
- +
Logik 24' HD Ready LED TV with DVD Player L24HEDW19(B) Manual.indd 37 24/09/2019 14:51

Logik L24HEDW19 Specifications

General

Brand	Logik
Model	L24HEDW19
Category	LED TV
Language	English