26
Using the Built-in DVD Player
1. Insert a disc with the label side facing towards the rear of the TV. (CD-R,
CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW) Allow 10 seconds
for the player to load the disc. If you insert the disc incorrectly, an error
message will be displayed.
2. After the disc is inserted, the TV will change the input source to
DVD automatically and Smart NAVl will show the content of the disc
automatically.
3. If the DVD player does not automatically play the disc, press the DVD button
then press the button on the remote control to start playing.
4. Press the button if you want to remove the disc.
Compatible Disc Types
Disc Types Disc Logo Recorded Content
DVD-VIDEO (Digital Versatile Disc) AUDIO + VIDEO
DVD±RW (Audio/Video format or JPEG files)
AUDIO + VIDEO + JPEG
CD-R (CD Recordable - Audio/Video format or JPEG files) AUDIO + VIDEO + JPEG
CD-RW (CD-Rewritable - Audio/Video format or JPEG files) AUDIO + VIDEO + JPEG
AUDIO-CD (Compact Disc Digital Audio) AUDIO
Supported Formats
JPEG
• Pictures encoding must comply with JPEG/ISO format.
Some recorded files may not be played due to the type and format
of the disc or condition of the recording.
Region Code
Both the DVD player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do
not match, the disc will not play.
The Region Number for this DVD player is described on the rear panel of the TV.
Disc Type DVD-VIDEO
Region code
Using the DVD Features
• Only insert 12cm discs. Do not insert or play 8cm discs; they will get stuck.
• Ensure the disc is fully ejected before removing it, or else you risk damaging the DVD player.
• If you eject a DVD and want to play it again, fully remove the disc then replace it. Do NOT push it straight back in, it
may damage the DVD mechanism.
Label side at
the back
Unable to play disc!
Check label faces rear of TV
Check disc for marks or damage
Check disc is compatible type.
L32HED13_IB.indd 26 22/07/2013 12:48
To Next Page
Loading...
Need help?
General
