EasyManuals Logo
Home>Logik>TV DVD Combo>L32HED13

Logik L32HED13 User Manual

Logik L32HED13
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
44
The default password is 0000”.
If you change the password, be sure to remember the new
password! If you forget the new password, enter the master
password“8899”.
Lock System
Set Password
Block Channel
Parental Guidance
On
Key Lock On
Off
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
Key Lock
Key Locked is designed to prevent children from pressing the buttons on the TV. The Lock System must be set to On for this
function to operate. If the Key Locked is set to On, all buttons on the TV will be locked. All TV operations can be controlled by the
remote control only.
1. Press the MENU button and then press the buttons to select the
LOCK menu and then press the OK button.
2. Press the buttons to select Lock System and then press the OK
button.
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
4. Press the buttons to switch the System Lock ON.
Lock System
Set Password
Block Channel
Parental Guidance
On
Key Lock Off
Off
5. Press the buttons to select Key Lock and then press the OK button
to select On / Off.
6. Press the MENU button to return to the previous menu, press again to
return to the main menu.
7. Press the EXIT button to exit the menu.
Connecting a USB Storage Device
1. Switch off the TV before connecting any USB
storage device.
2. Connect your USB storage device to the USB port
of your TV. If your USB device is powered by the
main, plug the connected devices into the mains
socket and switch on.
3. Press the button on the remote control to turn
on your TV.
4. Press the USB button on the remote control to
enter USB mode.
Some versions of portable hard disk may require more power than the TV USB socket can provide. To ensure correct
operation please use the power adapter for that device.
If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption
may exceed 500mA.
The file system only supports FAT32 format.
If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not
be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will
be shown on the screen. If this happens, please upgrade your USB storage device.
The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is
normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.
Disconnect the USB storage device if it is not in use.
Rear Right Side View of TV
AV IN YPbPr
Coaxial
Out
USB HDMI 3 In
CI CARD IN
USB Cable
(not included)
Adapter
Portable
hard Disk
USB Hub
USB
L32HED13_IB.indd 44 22/07/2013 12:48

Table of Contents

Other manuals for Logik L32HED13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L32HED13 and is the answer not in the manual?

Logik L32HED13 Specifications

General IconGeneral
BrandLogik
ModelL32HED13
CategoryTV DVD Combo
LanguageEnglish

Related product manuals