15
6. The washing machine will beep and the display window
will show the remaining running time. “End” is displayed
when the programme is complete.
Wash Setting
First Time Use
Before the first use, run the machine empty with detergent using the cotton 90°C. This ensures any effects
from the manufacturing process are removed.
Standard Washing
1. Pull the door handle and put the laundry in the drum.
Make sure no laundry gets caught in the door.
2. Close the door. Press the ON/OFF button to switch on the
washing machine. Turn the Programme Dial to select
your wash programme. It will display the operating time.
3. Select any Optional Functions.
4. Add detergent into the detergent drawer. The quantity
of detergent will depend on the amount of laundry, the
degree of soiling and the water hardness. Use the amount
of detergent suggested on the packaging.
5. Press the Start/Pause button to start the washing.
If the door is locked and you switched the washing
machine off - or if there’s a power cut - it will stay
locked for 1 minute until you turn it back on again.
When you start the washing machine, the indicator flashes to confirm the function is in progress.
Once the washing machine has started, you can’t change the programme.
• For pre-wash programme, detergent should be
added to both compartments 1 and 2.
• For other programmes, DO NOT add detergent
to compartment 1.
1
3
2
Main wash
detergent
Softener
Pre-wash
detergent
Manual Soaking
To manually soak your laundry, press the Start/Pause button after 10 minutes of the wash programme. The
washing machine will suspend the laundry to soak in the water. After your desired soaking time, press the
Start/Pause button, the machine will continue the interrupted programme.
L612S_WD12_IB_120627_RC_Pauline.indd 15 28/06/2012 10:00 AM
To Next Page
Loading...
Need help?
General
