13
4. Setting up Activities for your Harmony 600
To set up Activities, you use the Add Activities page to enter the information related to
the Activities you will be using on your Harmony 600. The Harmony Remote Software
shows you a selection of recommended Activities based on the device information you
provided.
When you set up Activities, the software asks questions about the function of each device.
For example, if you set up the Watch TV Activity, you’re asked which device changes the
channels (TV or satellite/cable box). If you only have one device that is capable of doing
something, then the software skips the question. For example, if you only have one TV,
the software doesn’t ask you which device displays video.
If the device has more than one input, the software asks you which input the device
needs to be set. If you’re not sure which input a device uses, see Determining your inputs
for more information.
3. Setting up the devices you want to control
On the Add Devices page, the guided online setup asks you to enter your device
information. Enter the information for all the entertainment components you want to
control with your Harmony 600. You should use the Device Worksheet to gather all your
device information before starting the setup process.
Select the Device type for each of your devices.1.
Select the Manufacturer for each device.2.
Enter the Model number for each device.3.
Adding new devices at a later time
If you want to add newly acquired
devices after the initial setup, see Adding
and changing your devices.
Activities are the basis for how the Harmony 600
works. With Activities, the Harmony 600 eliminates
the need to use multiple remotes for simple tasks.
Just select the Activity and the Harmony 600 does
the rest. For more information on Activities, see
Adding and changing Activities.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
