EasyManuals Logo
Home>Logitech>Remote Control>Harmony 600

Logitech Harmony 600 User Manual

Logitech Harmony 600
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Testing your setup
Every time you update your Harmony 600, you should test your remote to ensure it’s
working the way you expect. This chapter gives you the information you need to test
your remote. It also has some suggestions on what to check while you’re testing your
setup.
If you run into specic issues while testing your remote, refer to the Troubleshooting
section of this manual for suggestions and possible xes for your problems.
The process of testing your Harmony 600 is straightforward. It involves simply trying the
Activities you use most often and then using the on-remote help to correct any issues.
In some cases, you may need to return to the Harmony Remote Software to make
changes to your remote’s setup to ensure the remote is working the way you want.
To begin testing your remote:
Disconnect the USB cable from your remote. 1.
If this is the rst time you’ve updated your remote, the Harmony 600’s
tutorial will start on the remote’s screen.
Ensure all the devices in your entertainment system are turned off.2.
If you are viewing the tutorial, follow the instructions displayed on the remote’s 3.
screen.
Go to your entertainment system and try each of your Activities. 4.
For tips on what to look for when starting an Activity, or switching between
Activities, see the tips in this chapter.
If an Activity doesn’t start correctly, press the 5. Help button on the remote and
the on-remote help will get you back “in sync”. After you nish testing your
Activities, be sure to re-test any for which you had to use the Help.
Testing your setup -- Starting an Activity
Look for these things in particular:
Did all of your devices for that Activity turn on?
Do you hear the correct sound?
If the Activity includes your TV, do you see the correct picture?
Testing your setup -- Switching between Activities
Look for these things in particular:
Are all devices needed for this new Activity on?
Did devices not needed for this Activity turn off?
Do you hear the correct Sound?
If the Activity includes your TV, do you see the correct picture?

Table of Contents

Other manuals for Logitech Harmony 600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logitech Harmony 600 and is the answer not in the manual?

Logitech Harmony 600 Specifications

General IconGeneral
LCD Size1.5" Diagonal
LCD Resolution128 x 128
LCD ScreenMonochrome
Backlight ColorWhite
Power SourceAA batteries
Brands Supported5, 000+
Devices Supported200, 000+
Maximum number of devices per account5
Supported PlatformsWindows XP/Vista/7 MAC OS X 10.3 +
Backlit keypadYes
IR Transmitters2
IR LearningYes (Up to 200 Khz)
Learning CapabilitiesAny IR Device (Up to 200 Khz)
IR Transmission RangeUp to 50 ft
Memory TypeFlash
Memory Amount2MB
Warranty1 Year (2 Years for Europe)
Weight and Dimensions IconWeight and Dimensions
Weight6 oz (with battery installed)
Dimensions8.75” x 2.3” x 1.3”

Related product manuals