Logitech Harmony 650 User Manual

11
The Harmony Remote Software leads you through a setup process and allows you to change
your setup later if you wish.
To begin, connect your remote to your computer using the USB cable provided and go to
www.logitech.com/myharmony. Follow the instructions to download the Harmony Remote Software.
After the software installs, start the Harmony Remote Software. When you start the Harmony Remote
Software, it checks for updates automatically and downloads them if necessary.
After you install the Harmony Remote Software and gather your device information using the Device
Worksheet, the setup process guides you through five steps in which you answer a series of questions
about how your entertainment system is set up.
Creating your user account1. : The setup walks you through creating a user account on
the Harmony Remote Software. You can also launch a tutorial about how to set up the
Harmony 650 from this step by clicking View Tutorial.
Connecting your Harmony 650 to your computer2. : The software ensures that your computer
and Harmony 700 are communicating with each other.
Setting up the devices you want to control:3. The software walks you through entering
the manufacturer and model numbers of your entertainment system that you collected using
the Device Worksheet.
Setting up Activities for the Harmony 6504. : The software asks you questions about how
your entertainment system is set up, and then saves the settings.
Updating the remote5. : The software transfers the information from your computer to the
remote.
For more information on installing the Harmony Remote Software, refer to the Quick-start Guide
that came with your Harmony remote.
Setting up your Harmony 650 for the rst time
Overview of the setup process
Gathering your device information
To simplify the setup process, we recommend you fill out the Device Worksheet,
so that all the device information is at hand when you need it.
Locating manufacturer and model number on your devices
Manufacturer names and model numbers are typically found at the front of
a device, on a label on the back of the device, or in the User Manual for that
device.

Logitech Harmony 650 Specifications

General

LCD Size	1.5" Diagonal
LCD Resolution	128 x 128
LCD Screen	65, 000 Color
Backlight Color	White
Power Source	AA batteries
Brands Supported	5, 000+
Supported Platforms	Windows XP/Vista/7 MAC OS X 10.3 +
Devices Supported	200, 000+
Maximum number of devices per account	5
IR Learning	Yes (Up to 200 Khz)
Learning Capabilities	Any IR Device (Up to 200 Khz)
IR Transmission Range	Up to 15 m
Backlit keypad	Yes
IR Transmitters	2
Memory Type	Flash
Memory Amount	2MB
Warranty	2 Years

Weight and Dimensions

Weight	170 g (with battery installed)
Dimensions	22.5 x 5.9 x 3.3 cm