Logitech Harmony 650 User Manual

12
2. Connecting your Harmony 650 to your computer
To connect your Harmony 650 to your PC, use the USB cable provided.
Connect the smaller end of the cable to the USB port on your remote.1.
Connect the wider end of the USB cable to a USB port on your computer.2.
On the Check Connection page, the software confirms that the Harmony 650 is 3.
communicating with your computer.
When you start the Harmony Remote Software for the first time, you must create your user account.
From the Harmony Remote Software, on the Getting Started page:
Click 1. Create New Account.
Complete the required account information.2.
Follow the instructions in the setup wizard.3.
1. Creating your user account
update remote
ok

Logitech Harmony 650 Specifications

General

LCD Size	1.5" Diagonal
LCD Resolution	128 x 128
LCD Screen	65, 000 Color
Backlight Color	White
Power Source	AA batteries
Brands Supported	5, 000+
Supported Platforms	Windows XP/Vista/7 MAC OS X 10.3 +
Devices Supported	200, 000+
Maximum number of devices per account	5
IR Learning	Yes (Up to 200 Khz)
Learning Capabilities	Any IR Device (Up to 200 Khz)
IR Transmission Range	Up to 15 m
Backlit keypad	Yes
IR Transmitters	2
Memory Type	Flash
Memory Amount	2MB
Warranty	2 Years

Weight and Dimensions

Weight	170 g (with battery installed)
Dimensions	22.5 x 5.9 x 3.3 cm