After making an initial connection, you can set up other computers on the remaining channels
using either Unifying or Bluetooth Smart technology. MX Anywhere 2 connects with up to three
devices.
Press the Easy-Switch button to select an open connection channel. After making an initial
connection, set up other computers on the remaining channels using either Unifying or Bluetooth
Smart (as described earlier in SET UP CONNECTIONS). MX Anywhere 2 connects with up to
three devices.
Select channels
Press the Easy-Switch button to cycle
through the three channels.
After setting up connections with up to three
computers, switch between them by selecting
the channel on which the desired device is
connected.
On the mouse, press the Easy-Switch
button.
When the connection is active, the channel
number light remains steady for 5 seconds.
The channel number light provides information
about the connection.
If the light is... MX Anywhere 2 is...
Steady Connected
Blinking (fast) Ready for pairing
Blinking (slow) Unable to complete
connection
Troubleshoot the connection
FEATURES
Explore the advanced features your new mouse offers.
Hyperfast
scrolling
Back/forward Gestures
Power
management
Darkfield sensor