SAFETY DECALS
Safety Decal Loacations
Note :
3. If a component with a safety decal(s) affixed is replaced with a new part, make sure new safety decal(s)
are attached in the same location(s) as the replaced components.
4. Mount new safety decals by applying on a clean dry surface and pressing air bubbles to outside edges.
Care of Safety Decals.
1. Keep safety decals clean and free of obstructing material.
2. Clean safety decals with soap and water and dry with a soft cloth.
Warning decals are visible when getting on backhoe. Refer to the left and right hands used in this manual, It's
the position of the operator when seated in the operating position of Backhoe
40358866
40255430
40358867
40358865
- 9 -
To Next Page
Loading...
Need help?
General
