GB Operating manual – multifunction measuring meter XA1000 / XP200 / XP400 • 08_2015 40
An overview of the currently available digital sensors
is provided below.
Further details about digital sensors and their use is
provided in the separate general catalogue.
Note!
Lufft
®
continually improves and broadens the range
of available sensors. Information on additional, new
sensors can be found on the website www.lufft.de.
The following accessories are optionally available.
Contact Lufft
®
customer service if you want this
alternative version:
Available digital sensors
No. Digital sensor
Article
number
Compatible
with
XA1000
XP200
XP400
103
TFF20
Sensor for temperature and
humidity measurements for
comparative measurements
in the maintenance service
8120.TFF X X
104
SDI sensor for temperature
and humidity measurements
with slim probe tube (∅
4 mm) for measuring at
poorly accessible places
9130.520 X X
105
SDI sensor for temperature
and humidity measurements
9130.540 X X
106
SDI sensor as reference
device for temperature and
air flow measurements in
the maintenance service
6120.510 X X
107
SDI sensor for temperature
and air flow measurements
in the climate metrology
6120.520 X X
103 104 106 108
109
105 107
110 111
108
SDI sensor for high temper-
ature and humidity meas-
urements with Teflon probe
inside a stainless steel sinter
cap
9130.530 X X
109 Stainless steel sinter cap 5120.212 for sensor (108)
110
TFF I sensor for XA1000 and
XP200
8130.TFF X X
111
CO
2
sensor for XA1000
7120.CO2 X
Further accessories (optional)
Accessories Article number
Case for XP200 / XP400 5900.CAS
Holster 5900.HOL
USB power supply 8120.NT
Humidity standard 11% 5560.FS11
Humidity standard 33% 5560.FS33
Humidity standard 53% 5560.FS53
Humidity standard 75% 5560.FS75
Humidity standard 90% 5560.FS90
Adapter for a diameter of 13 mm 5900.AD13
Extension cable 2 m 8120.KAB2
Stainless steel sinter filter 5120.212
Batteries 8120.SV1
No. Digital sensor
Article
number
Compatible
with
XA1000
XP200
XP400
To Next Page
Loading...
Need help?
General
